Jaeger Products, Company

To prevent packings from being swept away by the flow of gas of gas or vapour we supply hold-down plates of the type HP1 which are designed for this very purpose and which are attached either to a support ring or rest on ledges. Special clamps are supplied along with the plate for this purpose. The...

The hold-down plates type HP-P are used in combination with structured packings, lie on top of them and are stayed at the column wall. The plates are intended to prevent movement in the packed bed. The liquid distributors used together with packings are supported on the metal HP‑P hold-down plate...

The vane type liquid collector CV 1 consists of inclined and overlapping lamellas. The channels at the lower end of the lamellas lead the collected liquid into an annular channel which follows the column wall. The liquid collector CV 1 causes an extremely low pressure drop. Collectors of this type...

Type CP1 collectors are used in columns with a diameter >1200mm. The design is executed in analogy to the RP1 liquid redistributor, but instead of discharge holes it has a lateral downcomer shaft.

If you are looking for experienced efficiencies, pressure drop and capacities standard type structured packings like RASCHIG-PAK is the best choice. RASCHIG-PAK is a standard sheet type structured packing.

RASCHIG SUPER-PAK is a new structure with innovative advantages. If you a looking for best mass transfer efficiency, lowest pressure drop, highest capacity and applications in fouling services this new generation is the best solution.

Do you need a replacement of fastening material, random and structured packing or even whole components at short notice? It often happensthat damages on existing internals are only discovered after entering the column. In such cases time is always short and help is needed quickly. We at...